V-Line Compact 279-S
- Textured black powdercoat finish.
- Soft touch felt interior (Top and Bottom).
- Mechanical five button lock with over 1100 possible combinations.
- Elongated holes in the back of the Case allows the use of a standard padlock and/or cable lock to provide additional security.
- Easily fits into a briefcase, desk drawer, or small compartment.
- DIMENSION: 9 ½” x 7 ¼” x 2”
- WEIGHT: 5 lbs.
- Five button mechanical lock for quick access with 2200 possible combinations.
- 3/8" thick steel lock block welded to cover guides and adds strength to the lock bolt.
- Lock bolts directly through the inner frame of case to prevent prying.
- Sturdy fabricated steel construction with pry resistant clamshell design.
- Continuous hinge is welded on one end to prevent pin removal.
- Top opening pistol security case.
- Prepunched holes for easy installation.
- Foam lining on top and bottom protects and holds contents securely in place.
- Available in textured semi-gloss black or ivory powder coated finish.
- Accented with gold tone pinstripe and logo design. Custom logos and colors are available upon request.
- Model 2912-S can be mounted directly to any surface or attached with the optional Mounting
- Bracket for easy portability
- DIMENSION: 12” x 9” x 2 ½”
- WEIGHT: 10 lbs.
Mounting Bracket:
- Mounting Bracket allows your Top Draw Case to be transported. Lock tabs and thumb screws allow easy transfers, no tools are necessary to transfer case between brackets. 10" x 7" 2 lbs.
Installation:
- Prepunched holes enable the case to be installed directly to most surfaces. For optimum security V-Line Ind. highly recommends all Security Cases be properly installed. Recommended installation hardware: 4 each ¼" x 1" - 1½" lag bolts and 4 each ¼" flat washers.
- Five button mechanical lock for quick access, no keys to lose or batteries to change.
- 14 gauge steel inset door formed with reinforced edges.
- Pry-resistant panels on sides give extra strength.
- Sturdy fabricated steel construction.
- 3/8" thick steel lock block adds strength to lock.
- Lock bolt secures into opening on body of case.
- Continuous hinge welded inside to prevent removal.
- Interior felt lining on bottom to protect contents.
- Available in Black only.
- Door accented with gold trim and logo design.
- DIMENSION: 7 ½” x 10 ½” x 2 ½”
- WEIGHT: 8 lbs.
Quick Release Mounting Bracket for Desk-Mate:
- One Mounting Bracket (MBDM) comes standard with each Desk-Mate to allow easy installation under bed, desk, or any surface. Additional Quick Release Mounting Brackets may be purchased to allow the Desk-Mate to be transportable. 9"x 7" 2 lbs.
Universal Mounting Bracket:Use with Desk-Mate (2597-S) to install case on top or underneath surface. Tamperproof screws provide security and portability. 10"x 7" 2 lbs.
- Five button mechanical lock for quick access, no keys to lose or batteries to change.
- 14 gauge steel inset door formed with reinforced edges.
- Pry-resistant panels on sides give extra strength. Sturdy fabricated steel construction.
- Sturdy fabricated steel construction.
- 3/8" thick steel lock block adds strength to lock.
- Lock bolt secures into opening on body of case.
- Continuous hinge welded inside to prevent removal.
- Slide out drawer with felt lining.
- Available in choice of Black or Ivory.
- Door accented with gold trim and logo design.
- Ideal Security Case for use at Home, Office, or RV.
- DIMENSION: 12 ½” x 9” x 3 ½”
- WEIGHT: 18 lbs.
Quick Release Mounting Bracket for Hide-Away:
- One Mounting Bracket (MBHA) comes standard with each Hide Away to allow easy installation under bed, desk, or any surface. Additional Quick Release Mounting Brackets may be purchased to allow the Hide-Away to be transportable. 10"x 7" 2 lbs.
Universal Mounting Bracket: This Mounting Bracket allows the Hide-Away (3912-SH), to be installed on top of desk or counter top, as well as underneath surface. Tamperproof screws offer security and portability. 13¼"x 8¼" x 3¾" 4 lbs.
The Quick Vault offers a variety of installation possibilities. Quick Vault can be flush mounted in between wall studs, mounted horizontally or vertically on top of most surfaces, or used as a free standing case. Large enough to handle most personal accessories such as jewelry, cash, wallet, firearms and pharmaceuticals.
- Five button mechanical lock allows quick and easy access.
- 3/8" thick steel lock block adds strength to lock.
- Anti-Pry Plates hold door securely.
- Felt Lined back and walls protect contents.
- One felt lined adjustable shelf included. Additional shelves available.
- Available in Ivory only.
- DIMENSION: 14” x 12” x 4”
- WEIGHT: 23 lbs.
- Mechanical push button lock for quick access, no keys to lose or batteries to change.
- 3/8" thick steel lock block gives added strength to lock.
- Two each Tubular Key Locks offer additional security when quick access is not needed.
- Sturdy fabricated steel construction .
- Continuous hinge, staked to prevent removal.
- Prepunched holes for easy installation.
- Finished in Black powder coat with foam lined interior.
- Shotgun cases are accented with handsome gold pinstripe and logo design. Rifle case w/logo only.
- DIMENSION: 42” x 8” x 3 ½”
- WEIGHT: 27 lbs.
Shotgun and Rifle Cases are designed to be mounted directly to your wall or floor. Great for use at home, office, RV or boat.
V-Line Rifle Case 31242-SA
- Mechanical push button lock for quick access, no keys to lose or batteries to change.
- 3/8" thick steel lock block gives added strength to lock.
- Two each Tubular Key Locks offer additional security when quick access is not needed.
- Sturdy fabricated steel construction .
- Continuous hinge, staked to prevent removal.
- Prepunched holes for easy installation.
- Finished in Black powder coat with foam lined interior.
- Shotgun cases are accented with handsome gold pinstripe and logo design. Rifle case w/logo only.
- DIMENSION: 42” x 12” x 3 ½”
- WEIGHT: 38 lbs.
Shotgun and Rifle Cases are designed to be mounted directly to your wall or floor. Great for use at home, office, RV or boat.
V-Line Closet Vault 51653-SA
- Recessed Long Gun Security Cabinets.
- The door and frame protrude 2" to provide extra internal depth
- Five Button Lock allows quick and easy access
- Tubular Key Locks give added security when quick access is not required
- Door mounts flush into frame to protect against prying
- Accommodates 4 long guns (depending on size)
- One adjustable barrel support
- Felt liner on bottom cushions gun stock
- DIMENSION: 53” x 16 ¾” x 5 ¾”
- WEIGHT: 58 lbs.
Adjustable, foam Barrel Support with adhesive backing allows you to cut into sections for various barrel height control.
Half Shelf (HSCV) and Gun Caddy (GCCV) can be mounted on left or right side.





3 Comments:
Hmm I love the idea behind this website, very unique.
»
Looks nice! Awesome content. Good job guys.
»
Cool post! I like the cabinet where you can place your guns. It's a safe place especially when there are kids around, it's a cabinet where you can lock the guns and keep it away for safety too. Very nice design!
Creative Safety Supply
Post a Comment
<< Home